Next: lib-logarr, Previous: lib-linda, Up: The Prolog Library [Contents][Index]
library(lists)This library module provides operations on lists. Exported predicates:
select(?Element, ?Set, ?Residue)is true when Set is a list, Element occurs in Set, and Residue is everything in Set except Element (things stay in the same order).
selectchk(+Element, +Set, ?Residue)is to select/3 what memberchk/2 is to member/2. That is, it locates
the first occurrence of Element in Set, and deletes it, giving Residue.
It is steadfast in Residue.
append(+ListOfLists, -List)is true when ListOfLists is a list [L1,...,Ln] of lists, List is a list, and appending L1, ..., Ln together yields List. ListOfLists must be a proper list. Additionally, either List should be a proper list, or each of L1, ..., Ln should be a proper list. The behavior on non-lists is undefined. ListOfLists must be proper because for any given solution, infinitely many more can be obtained by inserting nils ([]) into ListOfList. Could be defined as:
append(Lists, Appended) :- ( foreach(List,Lists), fromto(Appended,S0,S,[]) do append(List, S, S0) ).
append(?Prefix, ?Tail1, ?List1, ?Tail2, ?List2)is true when append(Prefix, Tail1, List1) and append(Prefix, Tail2, List2)
are both true. You could call append/3 twice, but that is order-
dependent. This will terminate if Prefix is a proper list or if
either List1 or List2 is a proper list.
correspond(?X, ?Xlist, ?Ylist, ?Y)is true when Xlist and Ylist are lists, X is an element of Xlist, Y is
an element of Ylist, and X and Y are in similar places in their lists.
No relation is implied between other elements of Xlist and Ylist.
For a similar predicate without the cut, see select/4.
delete(+List, +Kill, -Residue)is true when List is a list, in which Kill may or may not occur, and
Residue is a copy of List with all elements equal to Kill deleted.
To extract a single copy of Kill, use select(Kill, List, Residue).
Kill and the elements of
List should be sufficiently instantiated for \= to be sound.
Could be defined as:
delete(List, Kill, Residue) :- ( foreach(X,List), fromto(Residue,S0,S,[]), param(Kill) do (X = Kill -> S0 = S ; S0 = [X|S]) ).
delete(+List, +Kill, +Count, -Residue)is true when List is a list, in which Kill may or may not occur,
and Count is a non-negative integer, and Residue is a copy of
List with the first Count elements equal to Kill deleted. If
List has fewer than Count elements equal to Count, all of them
are deleted.
Kill and the elements of List should be sufficiently instantiated for \= to be sound.
is_list(+List)succeeds when List is a proper list. That is, List is nil ([]) or a cons cell ([Head|Tail]) whose Tail is a proper list. A variable, or a list whose final tail is a variable, or a cyclic list, will fail this test.
keys_and_values(?[K1-V1,...,Kn-Vn], ?[K1,...,Kn], ?[V1,...,Vn])is true when its arguments look like the picture above. It is meant
for splitting a list of Key-Value pairs (such as keysort/2 wants and
produces) into separate lists of Keys and of Values. It may just as
well be used for building a list of pairs from a pair of lists. In
fact one usually wants just the keys or just the values, but you can
supply _ as the other argument. For example, suppose you wanted to
sort a list without having duplicates removed. You could do
keys_and_values(RawPairs, RawKeys, _),
keysort(RawPairs, OrdPairs),
keys_and_values(OrdPairs, OrdKeys, _).
Could be defined as:
keys_and_values([], [], []). keys_and_values([Key-Value|Pairs], [Key|Keys], [Value|Values]) :- keys_and_values(Pairs, Keys, Values).
last(+List, -Last)is true when List is a List and Last is its last element.
There is also a last(?Fore, ?Last, ?List)
whose argument order matches append/3.
This could be defined as
last(L, X) :- append(_, [X], L).
nextto(?X, ?Y, ?List)is true when X and Y appear side-by-side in List. It could be written as
nextto(X, Y, List) :- append(_, [X,Y|_], List).
It may be used to enumerate successive pairs from the list.
List should be proper, otherwise nextto/3 will generate it.
nth0(?N, ?List, ?Elem)is true when Elem is the Nth member of List, counting the first as
element 0. That is, throw away the first N elements and unify Elem
with the next. E.g. nth0(0, [H|T], H).
Either N should be an integer, or List should be proper.
nth1(?N, ?List, ?Element)is true when Elem is the Nth member of List, counting the first as
element 1. That is, throw away the first N-1 elements and unify Elem
with the next element (the Nth). E.g. nth1(1, [H|T], H).
This is just like nth0/3 except that it counts from 1 instead of 0.
Either N should be an integer, or List should be proper.
nth0(?N, ?List, ?Elem, ?Rest)unifies Elem with the Nth element of List, counting from 0, and Rest
with the other elements. It can be used to select the Nth element
of List (yielding Elem and Rest), or to insert Elem before the Nth
(counting from 0) element of Rest, when it yields List, e.g.
nth0(2, List, c, [a,b,d,e]) unifies List with [a,b,c,d,e].
This can be seen as inserting Elem after the Nth element of Rest
if you count from 1 rather than 0.
Either N should be an integer, or List or Rest should be proper.
nth1(?N, ?List, ?Elem, ?Rest)unifies Elem with the Nth element of List, counting from 1, and Rest
with the other elements. It can be used to select the Nth element
of List (yielding Elem and Rest), or to insert Elem before the Nth
(counting from 1) element of Rest, when it yields List, e.g.
nth1(2, List, b, [a,c,d,e]) unifies List with [a,b,c,d,e].
Either N should be an integer, or List or Rest should be proper.
one_longer(?Longer, ?Shorter)is true when
length(Longer,N), length(Shorter,M), succ(M,N)
for some integers M, N. It was
written to make {nth0,nth1}/4 able to find the index, just as
same_length/2 is useful for making things invertible.
perm(+List, ?Perm)is true when List and Perm are permutations of each other. The main
use of perm/2 is to generate permutations. You should not use this
predicate in new programs; use permutation/2 instead. List must be
a proper list. Perm may be partly instantiated.
permutation(?List, ?Perm)is true when List and Perm are permutations of each other.
Unlike perm/2, it will work even when List is not a proper list.
Any way, it works by generating permutations of List and unifying them with Perm.
Be careful: this is quite efficient, but the number of permutations of an
N-element list is N!, and even for a 7-element list that is 5040.
perm2(?A,?B, ?C,?D)is true when {A,B} = {C,D}. It is very useful for writing pattern matchers over commutative operators.
proper_length(+List, ?Length)succeeds when List is a proper list, binding Length to its length.
That is, is_list(List), length(List, Length).
Will fail for cyclic lists.
remove_dups(+List, ?Pruned)removes duplicated elements from List, which should be a proper list. If List has non-ground elements, Pruned may contain elements which unify; two elements will remain separate iff there is a substitution which makes them different. E.g. [X,X] -> [X] but [X,Y] -> [X,Y]. The surviving elements, by ascending standard order, is unified with Pruned.
reverse(?List, ?Reversed)is true when List and Reversed are lists with the same elements
but in opposite orders. Either List or Reversed should be a
proper list: given either argument the other can be found. If
both are incomplete reverse/2 can backtrack forever trying ever
longer lists.
rev(+List, ?Reversed)is a version of reverse/2 which only works one way around.
Its List argument must be a proper list whatever Reversed is.
You should use reverse/2 in new programs, though rev/2 is
faster when it is safe to use it.
same_length(?List1, ?List2)is true when List1 and List2 are both lists and have the same number of elements. No relation between the values of their elements is implied. It may be used to generate either list given the other, or indeed to generate two lists of the same length, in which case the arguments will be bound to lists of length 0, 1, 2, ... If either List1 or List2 is bound to a proper list, same_length is determinate and terminating.
same_length(?List1, ?List2, ?Length)is true when List1 and List2 are both lists, Length is a non-negative integer, and both List1 and List2 have exactly Length elements. No relation between the elements of the lists is implied. If Length is instantiated, or if either List1 or List2 is bound to a proper list, same_length is determinate and terminating.
select(?X, ?Xlist, ?Y, ?Ylist)is true when X is the Kth member of Xlist and Y the Kth element of Ylist for some K, and apart from that Xlist and Ylist are the same. You can use it to replace X by Y or vice versa. Either Xlist or Ylist should be a proper list.
selectchk(?X, +Xlist, ?Y, +Ylist)is to select/4 as memberhck/2 is to member/2. That is, it finds the
first K such that X unifies with the Kth element of Xlist and Y with
the Kth element of Ylist, and it commits to the bindings thus found.
If you have Keys and Values in "parallel" lists, you can use this to
find the Value associated with a particular Key (much better methods
exist). Except for argument order, this is identical to correspond/4,
but selectchk/4 is a member of a coherent family. Note that the
arguments are like the arguments of memberchk/2, twice.
shorter_list(?Short, ?Long)is true when Short is a list is strictly shorter than Long. Long doesn’t have to be a proper list provided it is long enough. This can be used to generate lists shorter than Long, lengths 0, 1, 2... will be tried, but backtracking will terminate with a list that is one element shorter than Long. It cannot be used to generate lists longer than Short, because it doesn’t look at all the elements of the longer list.
subseq(?Sequence, ?SubSequence, ?Complement)is true when SubSequence and Complement are both subsequences of the
list Sequence (the order of corresponding elements being preserved)
and every element of Sequence which is not in SubSequence is in the
Complement and vice versa. That is,
length(Sequence) = length(SubSequence)+length(Complement),
e.g. subseq([1,2,3,4], [1,3,4], [2]). This was written to generate subsets
and their complements together, but can also be used to interleave two
lists in all possible ways.
subseq0(+Sequence, ?SubSequence)is true when SubSequence is a subsequence of Sequence, but may
be Sequence itself. Thus subseq0([a,b], [a,b]) is true as well
as subseq0([a,b], [a]). Sequence must be a proper list, since
there are infinitely many lists with a given SubSequence.
?- setof(X, subseq0([a,b,c],X), Xs).
Xs = [[],[a],[a,b],[a,b,c],[a,c],[b],[b,c],[c]]
?- bagof(X, subseq0([a,b,c,d],X), Xs).
Xs = [[a,b,c,d],[b,c,d],[c,d],[d],[],[c],[b,d],[b],[b,c],[a,c,d],
[a,d],[a],[a,c],[a,b,d],[a,b],[a,b,c]]
subseq1(+Sequence, ?SubSequence)is true when SubSequence is a proper subsequence of Sequence, that is it contains at least one element less. Sequence must be a proper list, as SubSequence does not determine Sequence.
sumlist(+Numbers, ?Total)is true when Numbers is a list of integers, and Total is their sum. Numbers should be a proper list. Could be defined as:
sumlist(Numbers, Total) :- ( foreach(X,Numbers), fromto(0,S0,S,Total) do S is S0+X ).
transpose(?X, ?Y)is true when X is a list of the form [[X11,...,X1m],...,[Xn1,...,Xnm]] and Y is its transpose, that is, Y = [[X11,...,Xn1],...,[X1m,...,Xnm]] We insist that both lists should have this rectangular form, so that the predicate can be invertible. For the same reason, we reject empty arrays with m = 0 or n = 0.
append_length(?Prefix, ?Suffix, ?List, ?Length)is true when
append(Prefix, Suffix, List), length(Prefix, Length).
The normal use of this is to split a List into a Prefix of a given Length and the corresponding Suffix, but it can be used any way around provided that Length is instantiated, or Prefix is a proper list, or List is a proper list.
append_length(?Suffix, ?List, ?Length)is true when there exists a list Prefix such that
append_length(Prefix, Suffix, List, Length) is true.
When you don’t want to know the Prefix, you should call this
predicate, because it doesn’t construct the Prefix argument,
which append_length/4 would do.
prefix_length(?List, ?Prefix, ?Length)is true when
prefix(List, Prefix) &
length(Prefix, Length).
The normal use of this is to find the first Length elements of
a given List, but it can be used any way around provided that
Length is instantiated, or
Prefix is a proper list, or
List is a proper list.
It is identical in effect to append_length(Prefix, _, List, Length).
proper_prefix_length(?List, ?Prefix, ?Length)is true when
proper_prefix(List, Prefix) &
length(Prefix, Length).
The normal use of this is to find the first Length elements of
a given List, but it can be used any way around provided that
Length is instantiated, or
Prefix is a proper list, or
List is a proper list.
It is logically equivalent to prefix(Prefix, List, Length), Length > 0.
suffix_length(+List, ?Suffix, ?Length)is true when
suffix(List, Suffix) &
length(Suffix, Length).
The normal use of this is to return the last Length elements of a given List. For this to be sure of termination, List must be a proper list. The predicate suffix/2 has the same requirement. If Length is instantiated or Suffix is a proper list, this predicate is determinate.
proper_suffix_length(+List, ?Suffix, ?Length)is true when
proper_suffix(List, Suffix) &
length(Suffix, Length).
The normal use of this is to return the last Length elements of a given List. For this to be sure of termination, List must be a proper list. The predicate proper_suffix/2 has the same requirement. If Length is instantiated or Suffix is a proper list, this predicate is determinate.
rotate_list(+Amount, ?List, ?Rotated)is true when List and Rotated are lists of the same length, and
append(Prefix, Suffix, List) &
append(Suffix, Prefix, Rotated) &
( Amount >= 0 & length(Prefix, Amount)
| Amount =< 0 & length(Suffix, Amount)
).
That is to say, List rotated LEFT by Amount is Rotated. If either List or Rotated is bound to a proper list, rotate_list is determinate.
rotate_list(?List, ?Rotated)is true when rotate_list(1, List, Rotated), but is a bit less
heavy-handed.
rotate_list(X, Y) rotates X left one place yielding Y.
rotate_list(Y, X) rotates X right one place yielding Y.
Either List or Rotated should be a proper list,
in which case rotate_list is determinate and terminating.
sublist(+Whole, ?Part, ?Before, ?Length, ?After)sublist(+Whole, ?Part, ?Before, ?Length)sublist(+Whole, ?Part, ?Before)is true when
length(Alpha, Before)
length(Part, Length)
length(Omega, After)
cons(?Head, ?Tail, ?List)is true when Head is the head of List and Tail is its tail.
i.e. append([Head], Tail, List). No restrictions.
last(?Fore, ?Last, ?List)is true when Last is the last element of List and Fore is the
list of preceding elements, e.g. append(Fore, [Last], List).
Fore or Last should be proper. It is expected that List will
be proper and Fore unbound, but it will work in reverse too.
head(?List, ?Head)is true when List is a non-empty list and Head is its head. A list has only one head. No restrictions.
tail(?List, ?Tail)is true when List is a non-empty list and Tail is its tail. A list has only one tail. No restrictions.
prefix(?List, ?Prefix)is true when List and Prefix are lists and Prefix is a prefix of List. It terminates if either argument is proper, and has at most N+1 solutions. Prefixes are enumerated in ascending order of length.
proper_prefix(?List, ?Prefix)is true when List and Prefix are lists and Prefix is a proper prefix of List. That is, Prefix is a prefix of List but is not List itself. It terminates if either argument is proper, and has at most N solutions. Prefixes are enumerated in ascending order of length.
suffix(?List, ?Suffix)is true when List and Suffix are lists and Suffix is a suffix of List. It terminates only if List is proper, and has at most N+1 solutions. Suffixes are enumerated in descending order of length.
proper_suffix(?List, ?Suffix)is true when List and Suffix are lists and Suffix is a proper suffix of List. That is, Suffix is a suffix of List but is not List itself. It terminates only if List is proper, and has at most N solutions. Suffixes are enumerated in descending order of length.
segment(?List, ?Segment)is true when List and Segment are lists and Segment is a segment of List. That is, List = _ <> Segment <> _ . Terminates only if List is proper. If Segment is proper it enumerates all solutions. If neither argument is proper, it would have to diagonalise to find all solutions, but it doesn’t, so it is then incomplete. If Segment is proper, it has at most N+1 solutions. Otherwise, it has at most (1/2)(N+1)(N+2) solutions.
proper_segment(?List, ?Segment)is true when List and Segment are lists and Segment is a proper
segment of List. It terminates only if List is proper. The only
solution of segment/2 which is not a solution of proper_segment/2
is segment(List,List). So proper_segment/2 has one solution fewer.
cumlist(:Pred, +[X1,...,Xn], ?V0, ?[V1,...,Vn])cumlist(:Pred, +[X1,...,Xn], +[Y1,...,Yn], ?V0, ?[V1,...,Vn])cumlist(:Pred, +[X1,...,Xn], +[Y1,...,Yn], +[Z1,...,Zn], ?V0, ?[V1,...,Vn])cumlist/4 maps a ternary predicate Pred down the list [X1,...,Xn] just as
scanlist/4 does, and returns a list of the results. It terminates
when the lists runs out. If Pred is bidirectional, it may be
used to derive [X1...Xn] from V0 and [V1...Vn], e.g.
cumlist(plus, [1,2,3,4], 0, /* -> */ [1,3,6,10]) and
cumlist(plus, [1,1,1,1], /* <- */ 0, [1,2,3,4]).
Could be defined as:
cumlist(Pred, Xs, V0, Cum) :- ( foreach(X,Xs), foreach(V,Cum), fromto(V0,V1,V,_), param(Pred) do call(Pred,X,V1,V) ). cumlist(Pred, Xs, Ys, V0, Cum) :- ( foreach(X,Xs), foreach(Y,Ys), foreach(V,Cum), fromto(V0,V1,V,_), param(Pred) do call(Pred,X,Y,V1,V) ). cumlist(Pred, Xs, Ys, Zs, V0, Cum) :- ( foreach(X,Xs), foreach(Y,Ys), foreach(Z,Zs), foreach(V,Cum), fromto(V0,V1,V,_), param(Pred) do call(Pred,X,Y,Z,V1,V) ).
maplist(:Pred, +List)succeeds when Pred(X) succeeds for each element X of List. List should be a proper list. Could be defined as:
maplist(Pred, Xs) :- ( foreach(X,Xs), param(Pred) do call(Pred, X) ).
maplist(:Pred, +OldList, ?NewList)succeeds when Pred(Old,New) succeeds for each corresponding Old in OldList, New in NewList. Either OldList or NewList should be a proper list. Could be defined as:
maplist(Pred, Xs, Ys) :- ( foreach(X,Xs), foreach(Y,Ys), param(Pred) do call(Pred, X, Y) ).
maplist(:Pred, +Xs, ?Ys, ?Zs)is true when Xs, Ys, and Zs are lists of equal length, and Pred(X, Y, Z) is true for corresponding elements X of Xs, Y of Ys, and Z of Zs. At least one of Xs, Ys, and Zs should be a proper list. Could be defined as:
maplist(Pred, Xs, Ys, Zs) :- ( foreach(X,Xs), foreach(Y,Ys), foreach(Z,Zs), param(Pred) do call(Pred, X, Y, Z) ).
map_product(Pred, Xs, Ys, PredOfProduct)Just as maplist(P, Xs, L) is the analogue of Miranda’s
let L = [ P x | x <- Xs ]
so map_product(P, Xs, Ys, L) is the analogue of Miranda’s
let L = [ P x y | x <- Xs; y <- Ys ]
That is, if Xs = [X1,...,Xm], Ys = [Y1,...,Yn], and P(Xi,Yj,Zij), L = [Z11,...,Z1n,Z21,...,Z2n,...,Zm1,...,Zmn]. It is as if we formed the cartesian product of Xs and Ys and applied P to the (Xi,Yj) pairs. Xs and Ys should be proper lists. Could be defined as:
map_product(Pred, Xs, Ys, Zs) :- ( foreach(X,Xs), fromto(Zs,S0,S,[]), param([Ys,Pred]) do ( foreach(Y,Ys), fromto(S0,[Z|S1],S1,S), param([X,Pred]) do call(Pred, X, Y, Z) ) ).
scanlist(:Pred, [X1,...,Xn], ?V1, ?V)scanlist(:Pred, [X1,...,Xn], [Y1,...,Yn], ?V1, ?V)scanlist(:Pred, [X1,...,Xn], [Y1,...,Yn], [Z1,...,Zn], ?V1, ?V)scanlist/4 maps a ternary relation Pred down a list. The computation is
Pred(X1,V1,V2), Pred(X2,V2,V3), ..., Pred(Xn,Vn,V)
So if Pred is plus/3, scanlist(plus, [X1,...,Xn], 0, V) puts the
sum of the list elements in V.
Note that the order of the arguments passed to Pred is the same
as the order of the arguments following Pred. This also holds
for scanlist/5 and scanlist/6, e.g.
scanlist(Pred, Xs, Ys, Zs, V1, V) calls Pred(X3,Y3,Z3,V3,V4).
Could be defined as:
scanlist(Pred, Xs, V0, V) :- ( foreach(X,Xs), fromto(V0,V1,V2,V), param(Pred) do call(Pred, X, V1, V2) ). scanlist(Pred, Xs, Ys, V0, V) :- ( foreach(X,Xs), foreach(Y,Ys), fromto(V0,V1,V2,V), param(Pred) do call(Pred, X, Y, V1, V2) ). scanlist(Pred, Xs, Ys, Zs, V0, V) :- ( foreach(X,Xs), foreach(Y,Ys), foreach(Z,Zs), fromto(V0,V1,V2,V), param(Pred) do call(Pred, X, Y, Z, V1, V2) ).
some(:Pred, +List)succeeds when Pred(Elem) succeeds for some Elem in List. It will
try all ways of proving Pred for each Elem, and will try each Elem
in the List. somechk/2 is to some/2 as memberchk/2 is to member/2.
member(X,L) <-> some(=(X), L).
memberchk(X, L) <-> somechk(=(X), L).
some(Pred,L) <-> member(X, L), call(Pred,X).
This acts on backtracking like member/2; List should be a proper list.
some(:Pred, +[X1,...,Xn], ?[Y1,...,Yn])is true when Pred(Xi, Yi) is true for some i.
some(:Pred, +[X1,...,Xn], ?[Y1,...,Yn], ?[Z1,...,Zn])is true when Pred(Xi, Yi, Zi) is true for some i.
somechk(:Pred, +[X1,...,Xn])is true when Pred(Xi) is true for some i, and it commits to
the first solution it finds (like memberchk/2).
somechk(:Pred, +[X1,...,Xn], ?[Y1,...,Yn])is true when Pred(Xi, Yi) is true for some i, and it commits to
the first solution it finds (like memberchk/2).
somechk(:Pred, +[X1,...,Xn], ?[Y1,...,Yn], ?[Z1,...,Zn])is true when Pred(Xi, Yi, Zn) is true for some i, and it commits to
the first solution it finds (like memberchk/2).
convlist(:Rewrite, +OldList, ?NewList)is a sort of hybrid of maplist/3 and include/3.
Each element of NewList is the image under Rewrite of some
element of OldList, and order is preserved, but elements of
OldList on which Rewrite is undefined (fails) are not represented.
Thus if foo(K,X,Y) :- integer(X), Y is X+K.
then convlist(foo(1), [1,a,0,joe(99),101], [2,1,102]).
OldList should be a proper list.
Could be defined as:
convlist(Pred, Xs, News) :- ( foreach(X,Xs), fromto(News,S0,S,[]), param(Pred) do (call(Pred,X,N) -> S0 = [N|S] ; S0 = S) ).
exclude(:Pred, +Xs, ?SubList)exclude(:Pred, +Xs, +Ys, ?SubList)exclude(:Pred, +Xs, +Ys, +Zs, ?SubList)succeeds when SubList is the sublist of Xs containing all the elements Xi[,Yi[,Zi]] for which Pred(Xi[,Yi[,Zi]]) is false. That is, it removes all the elements satisfying Pred. Xs, Ys or Zs should be a proper list. Could be defined as:
exclude(Pred, Xs, News) :- ( foreach(X,Xs), fromto(News,S0,S,[]), param(Pred) do (call(Pred,X) -> S0 = S ; S0 = [X|S]) ). exclude(Pred, Xs, Ys, News) :- ( foreach(X,Xs), foreach(Y,Ys), fromto(News,S0,S,[]), param(Pred) do (call(Pred,X,Y) -> S0 = S ; S0 = [X|S]) ). exclude(Pred, Xs, Ys, Zs, News) :- ( foreach(X,Xs), foreach(Y,Ys), foreach(Z,Zs), fromto(News,S0,S,[]), param(Pred) do (call(Pred,X,Y,Z) -> S0 = S ; S0 = [X|S]) ).
include(:Pred, +Xs, ?SubList)include(:Pred, +Xs, +Ys, ?SubList)include(:Pred, +Xs, +Ys, +Zs, ?SubList)succeeds when SubList is the sublist of Xs containing all the elements Xi[,Yi[,Zi]] for which Pred(Xi[,Yi[,Zi]]) is true. That is, it retains all the elements satisfying Pred. Xs, Ys or Zs should be a proper list. Could be defined as:
include(Pred, Xs, News) :- ( foreach(X,Xs), fromto(News,S0,S,[]), param(Pred) do (call(Pred,X) -> S0 = [X|S] ; S0 = S) ). include(Pred, Xs, News) :- ( foreach(X,Xs), fromto(News,S0,S,[]), param(Pred) do (call(Pred,X) -> S0 = [X|S] ; S0 = S) ). include(Pred, Xs, Ys, News) :- ( foreach(X,Xs), foreach(Y,Ys), fromto(News,S0,S,[]), param(Pred) do (call(Pred,X,Y) -> S0 = [X|S] ; S0 = S) ). include(Pred, Xs, Ys, Zs, News) :- ( foreach(X,Xs), foreach(Y,Ys), foreach(Z,Zs), fromto(News,S0,S,[]), param(Pred) do (call(Pred,X,Y,Z) -> S0 = [X|S] ; S0 = S) ).
partition(:Pred, +List, ?Less, ?Equal, ?Greater)is a relative of include/3 and exclude/3 which has some pretensions
to being logical. For each X in List, we call Pred(X,R), and route
X to Less, Equal, or Greater according as R is <, =, or > .
group(:Pred, +List, ?Front, ?Back)is true when append(Front, Back, List), maplist(Pred, Front),
and Front is as long as possible.
group(:Pred, +Key, +List, ?Front, ?Back)is true when append(Front, Back, List), maplist(call(Pred,Key), Front),
and Front is as long as possible. Strictly speaking we don’t need it;
group(call(Pred,Key), List, Front, Back) would do just as well.
group(:Pred, +List, ?ListOfLists)is true when append(ListOfLists, List), each element of ListOfLists
has the form [Head|Tail] such that group(Pred, Head, Tail, Tail, []),
and each element of ListOfLists is as long as possible. For example,
if you have a keysorted list, and define same_key(K-_, K-_), then
group(same_key, List, Buckets) will divide List up into Buckets of
pairs having the same key.
ordered(+List)is true when List is a list of terms [T1,T2,...,Tn] such that
for all k in 2..n Tk-1 @=< Tk, i.e. T1 @=< T2 @=< T3 ...
The output of keysort/2 is always ordered, and so is that of
sort/2. Beware: just because a list is ordered does not mean
that it is the representation of an ordered set; it might contain
duplicates.
ordered(+P, +[T1,T2,...,Tn])is true when P(T1,T2) & P(T2,T3) & ... That is, if you take
P as a "comparison" predicate like @=<, the list is ordered.
This is good for generating prefixes of sequences,
e.g. L = [1,_,_,_,_], ordered(times(2), L) yields L = [1,2,4,8,16].
max_member(?Xmax, +[X1,...,Xn])unifies Xmax with the maximum (in the sense of @=<) of X1,...,Xn.
The list should be proper. If it is empty, the predicate fails quietly.
Could be defined as:
max_member(Maximum, [Head|Tail]) :- ( foreach(X,Tail), fromto(Head,M0,M,Maximum) do (X@=<M0 -> M = M0 ; M = X) ).
min_member(?Xmin, +[X1,...,Xn])unifies Xmin with the minimum (in the sense of @=<) of X1,...,Xn.
The list should be proper. If it is empty, the predicate fails quietly.
Could be defined as:
min_member(Minimum, [Head|Tail]) :- ( foreach(X,Tail), fromto(Head,M0,M,Minimum) do (M0@=<X -> M = M0 ; M = X) ).
max_member(:P, ?Xmax, +[X1,...,Xn])unifies Xmax with the maximum element of [X1,...,Xn], as defined
by the comparison predicate P, which should act like @=< .
The list should be proper. If it is empty, the predicate fails quietly.
Could be defined as:
max_member(Pred, Maximum, [Head|Tail]) :- ( foreach(X,Tail), fromto(Head,M0,M,Maximum), param(Pred) do (call(Pred,X,M0) -> M = M0 ; M = X) ).
min_member(:P, ?Xmin, +[X1,...,Xn])unifies Xmin with the minimum element of [X1,...,Xn], as defined
by the comparison predicate P, which should act like @=< .
The list should be proper. If it is empty, the predicate fails quietly.
Could be defined as:
min_member(Pred, Minimum, [Head|Tail]) :- ( foreach(X,Tail), fromto(Head,M0,M,Minimum), param(Pred) do (call(Pred,M0,X) -> M = M0 ; M = X) ).
select_min(?Element, +Set, ?Residue)unifies Element with the smallest (in the sense of @=<) element
of Set, and Residue with a list of all the other elements.
select_min(:Pred, ?Element, +Set, ?Residue)find the least Element of Set, i.e. Pred(Element,X) for all X in Set.
select_max(?Element, +Set, ?Residue)unifies Element with the (leftmost) maximum element of the Set, and Residue to the other elements in the same order.
select_max(:Pred, ?Element, +Set, ?Residue)find the greatest Element of Set, i.e. Pred(X,Element) for all X in Set.
increasing_prefix(?Sequence, ?Prefix, ?Suffix)is true when append(Prefix, Suffix, Sequence)
and Prefix, together with the first element of Suffix,
forms a monotone non-decreasing sequence, and
no longer Prefix will do. Pictorially,
Sequence = [x1,...,xm,xm+1,...,xn] Prefix = [x1,...,xm] Suffix = [xm+1,...,xn] x1 <= x2 <= ... <= xm <= xm+1 not xm+1 <= xm+2
This is perhaps a surprising definition; you might expect that the first element of Suffix would be included in Prefix. However, this way, it means that if Sequence is a strictly decreasing sequence, the Prefix will come out empty.
increasing_prefix(:Order, ?Sequence, ?Prefix, ?Suffix)is the same as increasing_prefix/3, except that it uses the
binary relation Order in place of @=<.
decreasing_prefix(?Sequence, ?Prefix, ?Suffix)decreasing_prefix(:Order, ?Sequence, ?Prefix, ?Suffix)is the same, except it looks for a decreasing prefix.
The order is the converse of the given order. That
is, where increasing_prefix/[3,4] check X(R)Y, these
routines check Y(R)X.
clumps(+Items, -Clumps)is true when Clumps is a list of lists such that
append(Clumps, Items)
==)
Items must be a proper list of terms for which sorting would have been sound. In fact, it usually is the result of sorting.
keyclumps(+Pairs, ?Clumps)is true when Pairs is a list of pairs and Clumps a list of lists such that
append(Clumps, Pairs)
==) Keys.
Pairs must be a proper list of pairs for which keysorting would have been sound. In fact, it usually is the result of keysorting.
clumped(+Items, ?Counts)is true when Counts is a list of Item-Count pairs such that
if clumps(Items, Clumps), then each Item-Count pair in Counts corresponds
to an element [Item/*1*/,...,Item/*Count*/] of Clumps.
Items must be a proper list of terms for which sorting would have been
sound. In fact, it usually is the result of sorting.
keyclumped(+Pairs, ?Groups)is true when Pairs is a list of Key-Item pairs and
Groups is a list of Key-Items pairs such that
if keyclumps(Pairs, Clumps), then for each K-[I1,...,In] pair in Groups
there is a [K-I1,...,K-In] clump in Clumps.
Pairs must be a proper list of pairs for which keysorting would have
been sound. In fact, it usually is the result of keysorting.