Arithmetic evaluation and testing is performed by predicates that take arithmetic expressions as arguments. An arithmetic expression is a term built from numbers, variables, and functors that represent arithmetic functions. These expressions are evaluated to yield an arithmetic result, which may be either an integer or a float; the type is determined by the rules described below.

At the time of evaluation, each variable in an arithmetic expression must be bound to a number or another arithmetic expression. If the expression is not sufficiently bound or if it is bound to terms of the wrong type, Prolog raises exceptions of the appropriate type (see ref-ere-hex). Some arithmetic operations can also detect overflows. They also raise exceptions, e.g. division by zero results in a domain error being raised.

Only certain functors are permitted in arithmetic expressions. These
are listed below, together with a description of their arithmetic
meanings. For the rest of the section, `X` and `Y` are
considered to be arithmetic expressions. Unless stated otherwise, the arguments of an
expression may be any numbers and its value is a float if any of its
arguments is a float; otherwise, the value is an integer. Any
implicit coercions are performed with the `integer/1`

and
`float/1`

functions. All trigonometric and
transcendental functions take float arguments and deliver float
values. The trigonometric functions take arguments or deliver
values in radians.

The arithmetic functors are annotated with *[ISO]*,
with the same meaning as
for the built-in predicates; see ISO Compliance.

`+(`

`X``)`

- The value is
`X`. `-`

`X`- The value is the negative of
`X`. ISO `X``+`

`Y`- The value is the sum of
`X`and`Y`. ISO `X``-`

`Y`- The value is the difference between
`X`and`Y`. ISO `X``*`

`Y`- The value is the product of
`X`and`Y`. ISO `X``/`

`Y`- The value is the
*float*quotient of`X`and`Y`. ISO `X``//`

`Y`ISO- The value is the
*integer*quotient of`X`and`Y`. The result is always truncated towards zero.`X`and`Y`have to be integers. `X``rem`

`Y`ISO- The value is the
*integer*remainder after dividing`X`by`Y`, i.e.`integer(`

`X``)-integer(`

`Y``)*(`

`X``//`

`Y``)`

. The sign of a nonzero remainder will thus be the same as that of the dividend.`X`and`Y`have to be integers. `X``mod`

`Y`ISO- The value is
`X`modulo`Y`, i.e.`integer(`

`X``)-integer(`

`Y``)*floor(`

`X``/`

`Y``)`

. The sign of a nonzero remainder will thus be the same as that of the divisor.`X`and`Y`have to be integers. `integer(`

`X``)`

- The value is the closest integer between
`X`and 0, if`X`is a float; otherwise,`X`itself. `float_integer_part(`

`X``)`

ISO- The same as
`float(integer(`

`X``))`

.`X`has to be a float. `float_fractional_part(`

`X``)`

ISO- The value is the fractional part of
`X`, i.e.`X``- float_integer_part(`

`X``)`

.`X`has to be a float. `float(`

`X``)`

ISO- The value is the float equivalent of
`X`, if`X`is an integer; otherwise,`X`itself. `X``/\`

`Y`ISO- The value is the bitwise conjunction of the integers
`X`and`Y`.`X`and`Y`have to be integers. `X``\/`

`Y`ISO- The value is the bitwise disjunction of the integers
`X`and`Y`.`X`and`Y`have to be integers. `X``\`

`Y`- The value is the bitwise exclusive or of the integers
`X`and`Y`. `\(`

`X``)`

ISO- The value is the bitwise negation of the integer
`X`.`X`has to be an integer. `X``<<`

`Y`ISO- The value is the integer
`X`shifted left by`Y`places.`X`and`Y`have to be integers. `X``>>`

`Y`ISO- The value is the integer
`X`shifted right by`Y`places.`X`and`Y`have to be integers. `[`

`X``]`

- A list of just one number
`X`evaluates to`X`. Since a quoted string is just a list of integers, this allows a quoted character to be used in place of its character code; e.g.`"A"`

behaves within arithmetic expressions as the integer 65. `abs(`

`X``)`

ISO- The value is the absolute value of
`X`. `sign(`

`X``)`

ISO- The value is the sign of
`X`, i.e. -1, if`X`is negative, 0, if`X`is zero, and 1, if`X`is positive, coerced into the same type as`X`(i.e. the result is an integer, if and only if`X`is an integer). `gcd(`

`X``,`

`Y``)`

- The value is the greatest common divisor of the two integers
`X`and`Y`.`X`and`Y`have to be integers. `min(`

`X``,`

`Y``)`

- The value is the lesser value of
`X`and`Y`. `max(`

`X``,`

`Y``)`

- The value is the greater value of
`X`and`Y`. `msb(`

`X``)`

- The value is the position of the most significant nonzero bit of the integer
`X`, counting bit positions from zero. It is equivalent to, but more efficient than,`integer(log(2,X))`

.`X`must be greater than zero, and`X`has to be an integer. `round(`

`X``)`

ISO- The value is the closest integer to
`X`. If`X`is exactly half-way between two integers, it is rounded up (i.e. the value is the least integer greater than`X`). `truncate(`

`X``)`

ISO- The value is the closest integer between
`X`and 0. `floor(`

`X``)`

ISO- The value is the greatest integer less or equal to
`X`. `ceiling(`

`X``)`

ISO- The value is the least integer greater or equal to
`X`. `sin(`

`X``)`

ISO- The value is the sine of
`X`. `cos(`

`X``)`

ISO- The value is the cosine of
`X`. `tan(`

`X``)`

- The value is the tangent of
`X`. `cot(`

`X``)`

- The value is the cotangent of
`X`. `sinh(`

`X``)`

- The value is the hyperbolic sine of
`X`. `cosh(`

`X``)`

- The value is the hyperbolic cosine of
`X`. `tanh(`

`X``)`

- The value is the hyperbolic tangent of
`X`. `coth(`

`X``)`

- The value is the hyperbolic cotangent of
`X`. `asin(`

`X``)`

- The value is the arc sine of
`X`. `acos(`

`X``)`

- The value is the arc cosine of
`X`. `atan(`

`X``)`

ISO- The value is the arc tangent of
`X`. `atan2(`

`X``,`

`Y``)`

- The value is the four-quadrant arc tangent of
`X`and`Y`. `acot(`

`X``)`

- The value is the arc cotangent of
`X`. `acot2(`

`X``,`

`Y``)`

- The value is the four-quadrant arc cotangent of
`X`and`Y`. `asinh(`

`X``)`

- The value is the hyperbolic arc sine of
`X`. `acosh(`

`X``)`

- The value is the hyperbolic arc cosine of
`X`. `atanh(`

`X``)`

- The value is the hyperbolic arc tangent of
`X`. `acoth(`

`X``)`

- The value is the hyperbolic arc cotangent of
`X`. `sqrt(`

`X``)`

ISO- The value is the square root of
`X`. `log(`

`X``)`

ISO- The value is the natural logarithm of
`X`. `log(`

`Base``,`

`X``)`

- The value is the logarithm of
`X`in the base`Base`. `exp(`

`X``)`

ISO- The value is the natural exponent of
`X`. `X``**`

`Y`ISO`exp(`

`X``,`

`Y``)`

- The value is
`X`raised to the power of`Y`.

The following operation is included in order to allow integer arithmetic on character codes.

`[`

`X``]`

- Evaluates to
`X`for numeric`X`. This is relevant because character strings in Prolog are lists of character codes, that is, integers. Thus, for those integers that correspond to character codes, the user can write a string of one character in place of that integer in an arithmetic expression. For example, the expression (A) is equivalent to (B), which in turn becomes (C) in which case`X`is unified with 2:X is "c" - "a" (A)

X is [99] - [97] (B)

X is 99 - 97 (C)

A cleaner way to do the same thing is

X is 0'c - 0'a

Send feedback on this subject.