10.9 Accessing Files And Directories—library(file_systems)

This module provides operations on files and directories, such as renaming, deleting, opening, checking permissions, accessing members of.

The following principles have been observed:

The “property” routines use the same simplistic access control model as that used by the absolute_file_name/3 access/1-option. See mpg-ref-absolute_file_name, for details.

Exported predicates:

rename_file(+OldName, +NewName)
be renamed to NewName. The details of just when this can be done are operating-system dependent. Typically it is only possible to rename within the same file system.
rename_directory(+OldName, +NewName)
be renamed to NewName. The details of just when this can be done are operating-system dependent. Typically it is only possible to rename empty directories within the same file system.
delete_file(+OldName)
OldName must identify an existing file, which will be deleted.
delete_directory(+Directory)
delete_directory(+Directory, +Options)
Directory must identify an existing directory, which will be deleted, if empty. Options should be a list of at most one term of the form:
if_nonempty(Value)
Defines what to do if the directory is nonempty. One of:
ignore
The predicate simply succeeds, deleting nothing.
fail
The predicate simply fails, deleting nothing.
error
The predicate raises a permisison error.
delete
The predicate recursively deletes the directory and its contents.

directory_exists(+Directory)
directory_exists(+Directory, +Mode)
is true when Directory is an existing directory that is accessible according to Mode. Mode defaults to exist.

This is more or less equivalent to absolute_file_name(File, _, [file_type(directory), access([exist|Mode]), file_errors(fail)]).

make_directory(+Directory)
Directory is expanded, as if by absolute_file_name/3, and the resulting directory is created.
file_exists(+File)
file_exists(+File, +Mode)
is true when File is an existing file that is accessible according to Mode. Mode defaults to exist.

This is more or less equivalent to absolute_file_name(File, _, [access([exist|Mode]), file_errors(fail)]).

file_must_exist(+File)
file_must_exist(+File, +Mode)
is like file_exists(File[, Mode]) except that if the file is not accessible it reports an error.

This is more or less equivalent to absolute_file_name(File, _, [access([exist|Mode]), file_errors(error)]).

directory_must_exist(+File)
directory_must_exist(+File, +Mode)
is like file_must_exists(File[, Mode]), but for directories.

This is more or less equivalent to absolute_file_name(File, _, [file_type(directory), access([exists|Mode]), file_errors(error)]).

close_all_streams
closes all the streams (other than the standard streams) which are currently open. The time to call this is after an abort/0. Note that current_stream/3 does not notice the standard streams.
directory_member_of_directory(?BaseName, ?FullName)
is true when BaseName is the name of a subdirectory of the current directory (other than '.' or '..') and FullName is its absolute name.

This uses absolute_file_name/3 with the glob/1 option.

directory_member_of_directory(+Directory, ?BaseName, ?FullName)
is true when Directory is a name (not necessarily the absolute name) of a directory, BaseName is the name of a subdirectory of that directory (other than '.' or '..') and FullName is its absolute name.

This uses absolute_file_name/3 with the glob/1 option.

directory_member_of_directory(+Directory, +Pattern, ?BaseName, ?FullName)
is true when Directory is a name (not necessarily the absolute name) of a directory, BaseName is the name of a directory of that directory (other than '.' or '..') which matches the given Pattern, and FullName is the absolute name of the subdirectory.

This uses absolute_file_name/3 with a glob(Pattern) option.

directory_members_of_directory(-Set)
is true when Set is a set of BaseName-FullName pairs being the relative and absolute names of subdirectories of the current directory.

This uses absolute_file_name/3 with the glob/1 option.

directory_members_of_directory(+Directory, -Set)
is true when Set is a set of BaseName-FullName pairs being the relative and absolute names of subdirectories of the given Directory. Directory need not be absolute; the FullNames will be regardless.

This uses absolute_file_name/3 with the glob/1 option.

directory_members_of_directory(+Directory, +Pattern, -Set)
is true when Set is a set of BaseName-FullName pairs being the relative and absolute names of subdirectories of the given Directory, such that each BaseName matches the given Pattern.

This uses absolute_file_name/3 with a glob(Pattern) option.

file_member_of_directory(?BaseName, ?FullName)
is true when BaseName is the name of a file in the current directory and FullName is its absolute name.

This uses absolute_file_name/3 with the glob/1 option.

file_member_of_directory(+Directory, ?BaseName, ?FullName)
is true when Directory is a name (not necessarily the absolute name) of a directory, BaseName is the name of a file in that directory, and FullName is its absolute name.

This uses absolute_file_name/3 with the glob/1 option.

file_member_of_directory(+Directory, +Pattern, ?BaseName, ?FullName)
is true when Directory is a name (not necessarily the absolute name) of a directory, BaseName is the name of a file in that directory which matches the given Pattern, and FullName is its absolute name.

This uses absolute_file_name/3 with a glob(Pattern) option.

file_members_of_directory(-Set)
is true when Set is a set of BaseName-FullName pairs being the relative and absolute names of the files in the current directory.

This uses absolute_file_name/3 with the glob/1 option.

file_members_of_directory(+Directory, -Set)
is true when Set is a set of BaseName-FullName pairs being the relative and absolute names of the files in the given Directory. Directory need not be absolute; the FullNames will be regardless.

This uses absolute_file_name/3 with the glob/1 option.

file_members_of_directory(+Directory, +Pattern, -Set)
is true when Set is a set of BaseName-FullName pairs being the relative and absolute names of subdirectories of the given Directory, such that each BaseName matches the given Pattern.

This uses absolute_file_name/3 with a glob(Pattern) option.

directory_property(+Directory, ?Property)
is true when Directory is a name of a directory, and Property is a boolean property which that directory possesses, e.g.
              directory_property(., searchable).
     

The current set of file and directory properties include:

readable
writable
executable
searchable
Tries to determine whether the process has permission to read, write, execute (only for files) or search (only for directories) the file.
create_timestamp
modify_timestamp
access_timestamp
The time of creation, last modification or last access expressed as a timestamp. A timestamp is an integer expressing the time interval, in seconds, since the “Epoch”. The Epoch is the time zero hours, zero minutes, zero seconds, on January 1, 1970 Coordinated Universal Time (UTC).

The timestamp is what should be used when comparing information between files since it is independent of locale issues like time zone and daylight savings time etc.

create_localtime
modify_localtime
access_localtime
The same as the corresponding ..._timestamp values passed through system:datime/2, i.e. expressed as local time and split up in the components year, month, day, hour, minute, seconds.
set_user_id
set_group_id
save_text
True if the set-uid, set-group-id, save-text bits, respectively, are set for the file. Always false on Windows.
who_can_read
who_can_write
who_can_execute
who_can_search
A list containing the subset of [user,group,other] for the process classes that can, respectively, read, write, execute (only for files) or search (only for directories.
owner_user_id
owner_group_id
The id of the owner and group of the file. The id is an integer on UNIX and an atom (expressed as a string security identifier) on Windows.
owner_user_name
owner_group_group
The atom containing the name of the files owner and group respectively. On Windows a name like 'DOMAIN\NAME' will be used.

If for some reason the name cannot be found it will fall back to using the same value as owner_user_id and owner_group_id.

Other properties may be added in the future. You can backtrack through the available properties by calling file_property/3 or directory_property/3 with an uninstantiated Property argument.

directory_property(+Directory, ?Property, ?Value)
is true when Directory is a name of a directory, Property is a property of directories, and Value is Directory's Property Value. See directory_property/2, above, for a list of properties.
file_property(+File, ?Property)
is true when File is a name of a file, and Property is a boolean property which that file possesses, e.g.
              file_property(., readable).
     

See directory_property/2, above, for a list of properties.

file_property(+File, ?Property, ?Value)
is true when File is a name of a file, Property is a property of files, and Value is File's Property Value. See directory_property/2, above, for a list of properties.
current_directory(-Directory)
current_directory(-Directory, +NewDirectory)
Directory is unified with the current working directory and the working directory is set to NewDirectory.

Send feedback on this subject.